RapidPurge Mechanical purging compounds are the competitive choice for general purpose purging applications providing quick cleaning, scrubbing, and polishing of injection, extrusion machinery and blow molding equipment.
MP900 is 100% pelletized filled resin without foaming, comprised of FDA/GRAS materials. This is a good choice if purging machines with small feed throats.
MP900 grades are available as a premix and concentrate. The pre-mixed products include a universal carrier resin, providing the ultimate in convenience and handling. Concentrates can be mixed at your location with your regrind or production resin to improve general purpose purging effectiveness.
These mechanical grades are available with different PE base resins to match your temperature and viscosity requirements.
- MP900 – premix – most universal grade – best answer for most resins. Formulated for 380-565F.
- MP900HT – premix – formulated for high viscosity/stiff resins and high temperature purging up to 725F.
- MP900LT – premix – especially formulated for low viscosity/soft resin purging up to 450F.
- MC900 – concentrate scrubbing pellets – allows you to make your own universal purge mixture. Must be mixed with a carrier resin prior to use – works well with regrind or virgin resin (PE/PP) to make a universal mechanical/scrubbing purge mixture. Loaded with scrubbing additives to give your regrind/ resin that ex
≡ Features
Mechanical Activity
Non-abrasive mechanical components enhance scrubbing and soft polishing of the machinery’s base metal.
No Dwell Time In Machine
Our mechanical purges can be run right through the machine with the screw at normal RPMs.
No Temperature Changes
Our mechanical purges can be run right through the machine at operating temperatures.
No Multi-Step Procedures
Simply run RapidPurge through the machine until purging are clear of contaminates. Ideal for quick color or material changes.
Pre-Mixed
The pre-mixed products include a universal carrier resin, providing the ultimate in convenience and handling.
Concentrates
Concentrates can be mixed at your location with your polyolefin resin in a ratio up to 2:1. Concentrate to be mixed with resin of equal or greater value in viscosity than resident resin being purged.